MS Engineering: The Final Challenge!

Wow! What an incredible display of robotic strength and fortitude! Mr. Meadth would like to thank all of the eighteen middle school students who worked so hard and waited so long to show their programming prowess. Many thanks also to all of the many parents who came to watch.

Mr. Meadth watches for adherence to the rules of competition
as Kassy and Miranda head off against Tzevon and Mark
Tully and Dennis make the final checks as Audrie and Jeffry
prepare their program

Miranda and Kassy with the biggest, blockiest
bot of them all!

After a gripping round of preliminaries, it was clear that Jon and Ella were not to be beaten, consistently needing only 43 seconds both times to get all three cubes in the goal. Ryan and Gideon zoomed down the line with double wins, as fast as 37 seconds. Kassy and Miranda took it slow and steady, but won both matches with an average of 2:19. A special qualifying round also put Liza and Kaitlyn through with their prize horse, with a record-breaking 18 seconds!

Tully and Dennis proudly showing their machine

Ryan and Gideon were very proud of their
geared-up racer
In the elimination round, Liza and Kaitlyn beat out Jon and Ella with a lightning-fast 21 seconds. The secret? High speed gear ratios, where Jon and Ella stuck to direct drive. And in a stunning upset, Ryan and Gideon lost out–despite their high speed gears–to the perfectly consistent Kassy and Miranda, who beat their previous times by over a minute!
Mark and Tzevon designed a conveyor belt to
get their cubes in the box

Jeffry and Audrie went for the “tall tricycle” design

In an all-girl final round, Liza and Kaitlyn made the first drop. But they fumbled the second, and Kassy and Miranda faithfully dropped theirs in the box to equal the scores. A couple of unforced errors, some bouncing out, and the scores were again tied at two all! In the end, however, nothing could stop the speed and accuracy of Liza and Kaitlyn, who wrapped it all up with an impressive time of 49 seconds! Well done, girls!
For more photos and videos, students can use their Providence Google accounts to check out Miss Hurlbert’s online folder, here.

From left to right (rear): Mr. Meadth, Gideon, Jeffry, Audrie,
Kassy, Miranda, Liza, Kaitlyn, Ella, Lily, Paul, Angel
Front: Jon, Evan

MS Science and Engineering Expo Photos

Thanks to all students, parents, and teachers for another incredible evening! The quality of the exhibits was high, and we could tell you worked hard. Enjoy the photos and videos below–you can click/tap on them to enlarge.

Tessa and Chloe show their Rube Goldberg dog feeding machine

Small children are enthralled!

The dogs enjoyed the show, too

A functional, hand-cranked, 3D-printed
Archimedean Screw

 

Jed and Ben show Lower Campus students their French Revolution
demonstration–fruit was definitely harmed in the making of this
exhibit!

 

…but put to good use in the
Blender Bicycle by Cate and Valeria!
Don’t forget to hold that lid on!

 

Mercy and Jenny help Mrs. Short to understand key principles of
buoyancy, density, and mass–looks like exciting stuff!

Christine and Ashlynne with their impressive pulley arrangements

Pedro and Julian with their LEGO version of the legendary
Claw of Archimedes

Lux and Olivia put together this
impressive homemade hydraulic
robot arm–well done, girls!

Selene, Mr. Hougo, and Asher prepare a live demonstration of
a compound pulley system

Doing fine, three feet off the ground
Also doubles as a “time out” device
for small children (it’s all right–it’s
Mr. Meadth’s son)
Caleb and Michael explored another
apocryphal war engine: the Archimedes
Death Ray!

 

Chloe and Ava with a motorized Aerial Screw, taken straight from
the pages of Leonardo da Vinci’s notebook

Kayode and Josh lift 80 pounds of concrete and steel with a 3:1
mechanical advantage

Dylan and Jordan produced another
engine of war: the tennis ball ballista!

Sam and Tommy with their homemade motorized paper plane
launcher!  Standard equipment for every boy aged 5 to 105

 

Belen and Erica with an array of
marshmallow catapults

A surprising number of marshmallows never made it to the catapults

When Mr. Alker’s son wasn’t eating them, Mr. Alker was

Deacon and Chris were popular with
the racing crowd, tracking time, speed,
momentum, and kinetic energy

Julian and Zak loading a high-tension catapult, constructed entirely
of steel frame–be sure to watch the videos!

Once again, well done 8th Grade! Finish the year strong, and we’ll do this again next year.

MS Science and Engineering Expo–Monday!

The Providence Engineering Academy and the MS Science Department are excited to present the second annual Middle School Science and Engineering Expo. It will be held at the Providence Upper Campus (630 East Canon Perdido Street) on Monday, April 24 from 4:30 pm to 6:30 pm. Entry is free, and refreshments will be provided.

Levers, pulleys, and screws, oh my! The theme is “Machines”, with a medieval/Renaissance twist. The students have spent a month preparing their projects, building catapults, pulley systems, Archimedean war engines, and more. The interactive exhibits will be running the entire time, so come learn and support our students at this fun, family-friendly event!

Erica and Belen carefully design their catapult poster
Dylan with his very impressive
tennis ball ballista

Science history buffs might recognize this one–Eureka!

Julian with an almost-finished Archimedean war engine

Is that a blender on the back of that bike, Valeria? Smoothie to go!

Chloe with a scale model of Leonardo’s aerial screw

(Many thanks to Kylie from the Providence Engineering Academy for helping write this article.)