It was such a roaring success the first time that we just had to do it all over again! The second annual Providence Engineering Summer Camp finished today, and the brightly lit robot city took wings with our special theme: SPACE. We all know it’s the final frontier, and our fifteen campers interpreted this idea in a multitude of ways. Alien invasion… meteorite shower… rocket launch… solar system buildings… 3D printed rockets and planets… so much fun!
Todd helps his team with some simple geometric designs
High school engineering students Joshua, Todd, Alena, and Sam led the charge each day teams of devoted campers from Providence and the broader community. We also had a good deal of help from Isabela! These excellent engineers taught the campers how to build electronic circuits, program robots, 3D print fantastic creations, and design out-of-this-world architecture. Illuminated buildings towered high above the cityscape as tiny robots darted to and fro. Electrified copper rails ran this way and that carrying power to critical components, with printed sculptures dotting the landscape.
Success! A single 3 V coin battery powers nine blue LEDs… or is it only eight?
There was no messing around, eitherâ€”these elementary students learned their stuff! You can ask them what “LED” stands for, and what a “forever loop” might be used for. They know how to build a working switch out of paper and copper foil, and some of them even used their movie-making skills to record short action videos!
The Robot City landscape continues to become increasingly illuminated
As the days went by, the creations became increasingly complex. First was the skyscraper that was literally taller than Mr. Meadth. Then came the red/orange/green traffic light by the illuminated airstrip. 3D printed costumes were designed (by the campers, of course) for the tiny Ozobots in the shape of cars, rockets, and trains. Andâ€”of courseâ€”there was the obligatory fiesta of robot dance parties, all happening in perfect synchronization.
A delightful blue flower stands bold and tall
The end of each day came all too quickly. With lots to take home, we hope these happy campers will continue to code, invent architecture, and design circuits all summer long! Enjoy the rest of the photos, and we hope to have as many of you as possible back next year!
The 3D CAD model (computer aided design), becomesâ€”by magic!â€” a brightly lit reality
A tall rocket stands beside a crashed alien spacecraft
Our campers working hard to create all manner of new buildings
The tallest skyscraper in the room, complete with embedded meteorites and emergency beacons
The Copper Rocket throws an eerie light out onto the empty streets
What do you get when you put one teacher, three 3D printers, four high school assistants, sixteen kids, three hundred multicolored LEDs, sixteen tiny robots, and 64 square feet of plywood into two rooms for five days?!
Answer: the First Ever Providence Engineering Summer Camp!
Day 1–If You Build It, They Will Come Pardoning the Field of Dreams misquote, Day 1 was a foray into the world of architecture and design. The upper elementary students broke into four teams, and designed their cityscape. With only a few constraints in place, they freely designed bridges, hotels, apartment complexes, playgrounds, and the mysterious “Geico district.” We’re still not sure what the market is for robot insurance.
Alena and team search architectural
magazines for inspiration
The first few buildings emerge on Day 1
Sturdy apartment complexes and hotels begin to fill the landscape
Day 2–Light It Up After a brief lesson in electronics (diodes, conductors and resistors, oh my!), the students set about electrifying their buildings. Silver foil ran this way and that, transporting those much-needed electrons hither and yon. The prize for this day had to go to Tys’ group, with their carefully designed master control panel complete with disco dimmers.
Robot City and Britt’s Bridge come to life!
One participant’s entrepreneurial skills come to light
Tys overseeing his team’s very
formidable end of town
Day 3–Design and Print Arguably, they should be called 4D printers (since they operate in both space and time), but whichever side you take in this controversy, you have to agree they are a lot of fun. Students learned the fundamentals of computer-aided design (CAD), and then produced their various artifacts: signs, statues, elevators, desks, and… an artifact. The New Matter MOD-t printers ran hot for the remaining days, with many students producing two or more different designs.
An small sample of the dozens of printed designs generated by the camp participants
Students sit with Alena, eagerly watching their creations emerge layer by layer
A tiny blue fountain sits proudly on a street corner
Day 4–Rise of the Robots If all that wasn’t enough already, each student was given their own tiny programmable robot. The Ozobot packs a whole lot into one cubic inch, with students writing code for following lines, flashing lights, and dance routines. The robots were programmed in two different ways: with colored racetrack lines, and then alternatively with a block-based in-browser coding language.
These colored trails give the robot a path to follow and instructions
along the way
Lots of practice with the tiny bots
The block-based coding system is a snap!
Many participants created special
mazes and challenges
Day 5–Do Over! The week finished with a chance to go back to anything and everything! LEGO Mindstorms was used to power an elevator and merry-go-round, more CAD pieces were printed, the Geico district was finally lit up in a convincing fashion, and the robots ran amok. (In the best kind of way!)
The Geico District–now a blazing panoply of light!
Six robots come out for a dance-off!
Jake adds the finishing touches to our
once-humble board–now transformed!
We’ll finish with a huge thank you to our marvelous high school assistants, taken from the ranks of our own Engineering Academy; Tys, Jake, Alena, and Samy all did a fantastic job, and we hope they get some good rest this summer.